“J” Level Arch Sheet Metal

STARTING MARCH 6, 2019 
Course Curriculum: (32-Hour Training) 4 Hours, 8 Nights

This 32-hour class is designed to teach you some basics of fabricating and installing Architectural Sheet Metal.  The primary focus of this class will be on installation skills with plenty of hands on applications.  Getting a completion certificate for this class will certainly help make you more employable with roofing and architectural firms.  Don’t limit your options to ductwork!

              

                           1.     Introduction - Entrance Test - Arch

                           2.    Insulation / Weather Barriers / Furring

                           3.    Flush Seam Panels

                           4.    Cap and Counter (Coping and Counter Flashing)

                           5.    Stand Seams / Corrugated Panels

                           6.    Composite (Wet and Dri-Set Systems)

                           7.    Hook Seam and S-Slip Fab and Install

                       8.    General Knowledge - Exit Review and Final 

March 6, 7, 13, 14, 20, 21, 27 and 28 

Wednesdays and Thursdays 4:30 – 8:30 pm

Instructors Ricky Ventrelli and Jon Turner - Room 122
BRING CURRENT DUES RECEIPT!

To register, email jsand@metrojatc.org or call 651-779-6264

GAS BURNER CODE REVIEW CLASS WILL BEGIN ON FEBRUARY 7, 2019

This 16-hour class will help you better understand the gas safety controls of a residential furnace and their operation. It will also cover proper gas piping procedures, pipe sizing, clocking, meter and gas troubleshooting, and combustion analysis (Orsat tests).

Class will be held on Thursdays from 4:30 to 8:30 p.m. at the Training Center in Room 118 on 2/7, 2/21, 2/28 and 3/7/19. A current dues receipt is mandatory to attend class.

To register for this class (GAS-1), email jsand@metrojatc.org or call 651-779-6264

POWER LIMITED TECHNICIAN UPGRADE CLASS STARTS JANUARY 10, 2019

If you hold the Minnesota Power Limited Technician License, you are required to earn 16 hours of continued education for renewal of the license. Don't let your license lapse; it costs more money to renew if you do! This 16-hour class will give you the needed hours of upgrade training to maintain your license.

CHECK YOUR LICENSE EXPIRATION DATE NOW!

Power Limited Technician Upgrade classes will run from 4:30 to 8:30 p.m. at the Training Center in Room 118 on Thursdays 1/10, 1/17, 1/24, 1/31/19.  A current dues receipt is mandatory to attend class.

To register for this class (PLTU-1), call Jana Sand 651-779-6264 or email jsand@metrojatc.org

MECHANICAL CODE CLASS WILL BEGIN ON JANUARY 15, 2019

This 32-hour class is based on the 2015 Minnesota Mechanical and Fuel Gas Code.  This class will also help prepare you for the Twin Cities Warm Air & Ventilation Competency Exam.  It’s also very helpful for foremen and superintendents as well as detailers and estimators.  Participants in this class are required to provide their own codebook.  For your convenience, codebooks will be available (at our cost) at the Training Center.

Eight 4-hour classes will be held on Tuesdays/Wednesdays 1/15, 1/22, 1/29, 2/6, 2/12, 2/19, 2/26 and 3/6 from 4:30 to 8:30 p.m. at the Training Center in Room 124. A current dues receipt is mandatory to attend class.

To register for this class (MC-1), call Jana Sand at 651-779-6264 or email jsand@metrojatc.org

OPEN WELD

 Wednesday nights 4:30 - 8:30

This class is open to all members wishing to learn new weld skills or enhance existing ones, whether it is oxy-fuel, stick, wire, or heliarc welding. Various certifications will be attainable within this class for those wishing to certify, including structural and lagging weld certs. This is an open-entry, open-exit class. You may want to come in for one night only to re-certify or spend a dozen nights practicing for the D1.1 Structural certification.

Call Jana Sand at 651-779-6264 or email: jsand@metrojatc.org to enroll

OSHA 30 CLASS STARTS MONDAY, NOVEMBER 5, 2018

This OSHA 30 Class runs from 4:00 p.m. to 9:00 p.m. on the following nights:  MONDAY 11/5, WEDNESDAY 11/7, MONDAY 11/12, and TUESDAYS 11/13, 12/11, 12/18.  Mark Szybatka will be the instructor for this 30-hour class, which will be held in Room 122 at the Training Center.  A CURRENT DUES RECEIPT is mandatory to attend class.  Please contact Jana to sign up for this class:  jsand@metrojatc.org or 651-779-6264.  There are a limited number of openings and they will be filled on a first come, first served basis.

FOR THOSE WHO MISSED DAY 1, MAKE UP DAY IS WEDNESDAY 11/28/18.  YOU MUST BE HERE ALL SIX DAYS IN ORDER TO RECEIVE A CARD.  

RIGGING & SIGNAL PERSON TRAINING
Please contact the Sheet Metal Training Center to enroll in the Rigging class. If there is sufficient interest, a class will be held before the end of the school year.
Contact Katie at 651-779-6264 to enroll.

Power Limited Class will begin in May 2018. 
Contact the Training Center to enroll. 
651-779-6264 or kagness@metrojatc.org

Fire Life Safety Level One Class will be held on the following dates from 4:30 p.m. until 8:30 p.m.

• April 23, 2018
• April 30, 2018
• May 7, 2018
• TBD: Certification Exam Session

Jon Knudson will be the instructor for this 16-hour class which will be held in Room 124 at the Training Center.  A CURRENT DUES RECEIPT IS REQUIRED.

Please contact Katie to enroll: kagness@metrojatc.org OR 651.779.6264.  There are a limited number of openings for this class and it will be filled on a first come, first served basis.

Four Hours of Continuing Education for the Fire Life Safety Certification will be held at the Training Center on March 8, 2018. Please contact the Training Center at 651-779-6264 or kagness@metrojatc.org to enroll.

If you need Continuing Education Credit for Fire Life Safety; Please notify the Training Center. A Class will be scheduled shortly. Thank you.