Journey Level TAB Class

-IMPORTANT CLASS INFORMATION- TO: All Interested Journeypersons FROM: Sheet Metal Workers Local 10 Training Center SUBJECT: Testing, Adjusting, and Balancing Air Systems Testing, Adjusting, and Balancing Air Systems (TAB) class will be held on Mondays and Wednesdays beginning September 6, 2023 through March 27, 2024 from 4:30 p.m. until 8:30 p.m. excluding holidays. Joe Bremer and Tom Sauka will be the instructors for this class, which will be held in Room 116 at the Training Center. A current dues receipt must be presented on the first day of class. • The first 72 hours of TAB is designed to introduce the basics of TAB work to an individual, with lots of hands-on applications. You will learn how to set up and use flow hoods, manometers, and many other testing instruments used daily by TAB technicians. In addition, you will learn how to test and balance various types of mechanical equipment along with their related duct systems. This is an excellent class for people who want to learn how to do TAB work, as well as for those people currently doing it. • The next 56 hours of TAB is designed to teach advanced TAB balancing skills and procedures to technicians with some balancing experience. • Hydronics (the water side of TAB) balancing skills and procedures will also be taught (40 hours). • There will also be time spent to prepare to take the ITI Certified TAB Technician written exams for air and hydronics. The exams will be scheduled for a date after the conclusion of this class. If you are interested in attending this class, please submit a check for $100 to Metro JATC, 3554 White Bear Avenue North, White Bear Lake, MN 55110. The check will be returned to you when you complete the class; if you stop attending the class, your check will be cashed. Please contact Jana: jsand@metrojatc.org or 651.779.6264 ASAP to confirm your attendance in class. Class will be filled on a first come, first served basis. 3554 White Bear Avenue North, White Bear Lake, Minnesota 55110

Journey Level Service Class

TO: All Interested Journeypersons FROM: Sheet Metal Workers Local 10 Training Center SUBJECT: Servicing Environmental Systems Servicing Environmental Systems (SES) Class will be held on most Tuesdays and Thursdays beginning September 7, 2023 through May 21, 2024 from 4:30 to 8:30 p.m. Dave Fairbanks and Jesse Heien will be the instructors for this class in Room 106 at the Training Center. Please note that a mandatory dues receipt must be provided on the first day of class by each attendee. • SES will focus on the core knowledge required for servicing HVAC systems. We’ll cover the basics of refrigeration systems, systems design, pressure/temperature relationships, electricity fundamentals, and controls. • We will then go more in-depth in all the fundamental areas of HVAC service, such as gas heating, air conditioning, and air distribution. Plenty of time will be spent on wiring diagrams, troubleshooting, and hands-on work. • We will then focus exclusively on commercial hands-on service. Lab time will be spent on some of the newer components and systems that are out there today. If you are interested in attending this class, please submit a check for $100 to Metro JATC, 3554 White Bear Avenue North, White Bear Lake, MN 55110. The check will be returned to you when you complete the class; if you stop attending the class, your check will be cashed. Please contact Jana: jsand@metrojatc.org or 651.779.6264 ASAP to confirm your attendance in class. Class will be filled on a first come, first served basis.

QUALIFIED TELEHANDLER/LULL 1-DAY TRAINING

Qualified Telehandler/Lull 1-Day Training Metro JATC parking lot Wednesday, May 10, 2023 at 4:30-8:30 p.m. (Bring Current Local 10 Dues Receipt) Call Jana at 651-779-6264 to sign up (limited to 8)

ADVANCED REVIT BIM SOFTWARE TRAINING

 

ADVANCED REVIT BIM SOFTWARE TRAINING

28-hour class

Tuesdays and Thursdays

April 11, 13, 18, 20, 25, 27, May 4 & 9 

4:00 – 7:30 p.m.

Metro Area Sheet Metal Workers Local 10 Training Center, Room 50

 

Revit building design software is specifically built for Building Information Modeling (BIM).  This product includes features for architectural design, mechanical/electrical/piping (MEP), structural engineering, and construction. 

This 28-hour class will introduce experienced Foreman, Apprentices, and Detailers to the use of this software.  Prerequisite to taking this advanced class: some experience in or Beginning Revit BIM Software Class, proficient use of a computer.

You will be learning Revit family creation, Plot Sheet set-up, using Design Options, Advanced Scheduling, Project Phasing, Inserting point clouds into Revit model, Inserting Point clouds into Navisworks, Clouding and revising sheets, Roof opening plans with Trimble points and general BIM coordination knowledge.

Please contact Jana as soon as possible to CONFIRM YOUR PLACE in this class:  jsand@metrojatc.org (or 651.779.6264).  

There are a limited number of openings and they will be filled on a first come, first served basis. 

A Current Dues Receipt is mandatory to attend this class.

Gas Burner Code Review

 

        3-Day Class

        Gas Burner Code Review 

A great way to earn your continued education credits!  

Tuesday, May 16; Tuesday, May 23; Thursday, May 25

                        4:30 p.m. – 8:30 p.m.

                

Metro Area Sheet Metal Workers Local 10 Training Center
3554 White Bear Ave N – Room 118
White Bear Lake, MN 55110

CONFIRM YOUR PLACE in this class: jsand@metrojatc.org / 651-779-6264

A Current Dues Receipt is mandatory to attend class.

To confirm your place in class, you MUST submit a deposit of $100 at Metro JATC Office & attend ALL THREE NIGHTS in order have it returned to you.

Refrigeration Code Review

  

   3-Day Class 

Refrigeration Code Review

Tuesday, April 25

Thursday, April 27

Thursday, May 4

4:30-8:30 p.m.

This is a 12-hour class that is designed to provide you with in-depth knowledge of the refrigeration portion of the International Mechanical Code. This chapter in the code covers the design, installation, and construction of refrigeration systems that vaporize and liquefy a fluid during the refrigeration cycle.

Metro Area Sheet Metal Workers Local 10 Training Center

3554 White Bear Ave N – Room 118

White Bear Lake, MN 55110

CONFIRM YOUR PLACE in this class: jsand@metrojatc.org / 651-779-6264

A Current Dues Receipt is mandatory to attend class.

To confirm your place in class, you MUST submit a deposit of $100 at Metro JATC Office & attend ALL THREE NIGHTS in order have it returned to you.    

Must have 6000+ OJT hours to take this class.

LET'S GET READY TO TRIMBLE!!

 

INTRO TO TRIMBLE

4-Day "HANDS-ON" Course 

March 21, 23, 28 and 30th
4:30 - 8:30 p.m.

Sheet Metal Worker’s Local 10 Metro-Area Training Center 

– Meet in the Student Break Room –

3554 White Bear Avenue North, White Bear Lake

All capabilities of Trimble will be taught. 

Please contact Jana as soon as possible to CONFIRM YOUR PLACE in this class:  jsand@metrojatc.org (or 651.779.6264).   

This class is limited 8 openings and will be filled on a first come, first served basis.