J-Level Classes Now

REFRIGERANT HANDLING - CFC CERTIFICATION CLASS

2012-01-25T12:40:00.000-06:00

We need just a few more members to sign up for REFRIGERANT HANDLING - CFC CERTIFICATION CLASS so that we can get this class scheduled. Here is the class description:

This is a 12-hour class with the test for certification on the last night. It is a difficult test and should not be taken without the course instruction first. This is not a "hands on" class, the material covered is all in the classroom. If you pass the test, you will hold the card that is the Environmental protection Agency's certification to purchase and handle refrigerants as outlined in Section 608 of the Clean Air Act. The fine for improperly handling refrigerants can be up to $10,000.

Please contact Kate to put your name on this class list today:

kmino@metrojatc.org OR 651.779.6264

MSHA CERTIFICATION CLASS - STARTING SOON!

2012-01-13T07:44:00.000-06:00

We will be scheduling a MINE SAFETY & HEALTH ADMINISTRATION (MSHA) CLASS soon. MSHA certification is required for a lot of project sites up on the Iron Range as well as for work in cement plants everywhere. You will receive the MSHA-24 certifcation card upon successful completion of this class. Increase your options and get this card! Please note that unlike an OSHA card, the MSHA card requires eight hours of refresher training every year in order to maintain it.

Contact the Training Center today to get your name on the list for this class:

kmino@metrojatc.org OR 651.779.6264

PLASMA TABLE OPERATION CLASS - Starts January 31

2012-01-12T16:27:00.000-06:00

PLASMA TABLE OPERATIONS CLASS is designed to teach you how to run a plasma table. You will learn how to draw a custom part on a computer, load it into the plasma table and cut it. You will then learn to enter some stock HVAC type fittings and cut and label them. Some time will be spent learning how to read labels for forming as well so you learn all aspects of the table use, from data entry to forming up.

SIGN UP TODAY!

kmino@metrojatc.org OR 651.779.6264

MECHANICAL CODE CLASS STARTS JANUARY 5

2011-12-20T12:50:00.000-06:00

Mechanical Code Class will be starting on January 5. It is a 32-hour daytime class and is based on the 2009 MN State Mechanical, Fuel Gas, and Plumbing Code. This class will also help prepare you for the Twin Cities Warm Air & Ventilation Competency Exam. It is also very helpful for foremen and superintendents as well as detailers and estimators. Participants in this class are required to provide their own code book. For your convenience, code books will be available (at our cost) at the Training Center.

Please contact Kate to sign up for this class:

kmino@metrojatc.org OR 651.779.6264

OSHA 30 CERTIFICATION CLASS - STARTS JANUARY 9!

2011-12-19T10:52:00.000-06:00

Our next OSHA 30 Certification Class will run on Monday evenings beginning January 9. If you do not yet have this certification, you should consider taking this class. Here is the description:

This is a 30-hour safety awareness class. You will receive the OSHA-30 certification card upon successful completion of the class. More and more job specifications are requiring that at least one person per crew on the job site carry this certification. Put yourself in a good situation and get this card!

Register for this class: kmino@metrojatc.org OR 651.779.6264

LOAD CALCULATION AND DUCT DESIGN CLASS

2011-11-21T13:38:00.000-06:00

We have scheduled a Load Calculation and Duct Design Class to run the evenings of January 3, 5, 10, & 12, 2012. Here is the class description:

This 16-hour class will focus on the proper method to calculate heat loss for a residential home using a Manual J workbook and spreadsheet. Information from the spreadsheet will be used to calculate the heat loss for each room, and the entire house. Duct design will incorporate information from the heat loss spreadsheet to design a duct system to distribute the correct amount of air to each room to satisfy the load. NOTE: This class qualifies for NATE Continuing Education Hours.

To register for this class, contact Kate at the Training Center:

kmino@metrojatc.org OR 651.779.6264

SERVICING RESIDENTIAL FURNACE AND AIR CONDITIONING SYSTEMS

2011-11-14T13:45:00.000-06:00

This 72-hour class will be starting on Saturday, December 3. It is designed to give you some basic diagnostic and repair skills. We will be covering service calls and safety procedures, wiring diagrams, superheat & sub-cooling and A/C diagnosing, and troubleshooting electric and gas.

To sign up for this or any other class, please contact Kate:

kmino@metrojatc.org OR 651.779.6264

NOTICE: OPEN WELDING CLASS 'DAYS OFF'

2011-11-10T11:16:00.000-06:00

OPEN WELDING CLASS, which is held every Wednesday evening from 4:30 to 8:30 p.m., will NOT be held on the following dates:

November 23
December 21
December 28

PRO-10 CERTIFICATION CLASS

2011-11-04T08:48:00.001-05:00

There are two PRO-10 Certification classes scheduled to start soon, one on November 7 and one on November 8:

This is a 12-hour professional skills training class that goes beyond technical training. A few of the core topics covered are: Professionalism, Safety, Communication, Mutual Respect and Changing Perceptions. You will receive the PRO-10 certification card upon successful completion of this class. Some metro area job sites will soon be requiring you to have this card in order to work on that site, just like the requirement for an OSHA-30 card. All metro area apprentices currently in school are receiving this training and getting their cards. Don't limit your options for work, we highly recommend that you take this class now!

There is still room in these classes!

To sign up, contact Kate: kmino@metrojatc.org OR 651.779.6264.

More classes will be scheduled soon. Contact Kate to get your name on the list!

LAGGING CLASS

2011-09-08T12:01:00.002-05:00

We have a Lagging Class scheduled to start on October 5 and there are still openings. Here is the class description:

Lagging is the process of covering and protecting insulation with sheet metal, plastic, and other materials. This 40-hour class will provide you with some much needed basic skills in this aspect of our trade. There is a tremendous amount of power plant, refinery, and other industrial type work that is in the works within Local 10 and also nationwide. These types of projects typically require a lot of lagging fabrication and installation.

Sign up today!
kmino@metrojatc.org OR 651.779.6264

INTRODUCTION TO AUTOCAD

2011-09-08T09:17:00.001-05:00

We have an AutoCAD Class scheduled to start on October 3. Here is the class description:

AutoCAD is a Computer Aided Design program used to create drawings. This 48-hour class is designed to teach you the basics of creating and working with CAD drawings. You will learn how to draw on the computer and plot out the finished drawing on a plotter. This is an excellent preparatory class for someone interested in doing detailing and planning work. Good detailers are in demand!

If you are interested in taking this class please contact Kate:

kmino@metrojatc.org OR 651.779.6264

SERVICING ENVIRONMENTAL SYSTEMS 1

2011-09-08T08:30:00.000-05:00

We need a few more members to sign up for Servicing Environmental Systems 1 Class so that we can get it started soon.

SES 1 is an 88-hour class that will focus on the core knowledge required for servicing HVAC systems. We'll cover the basics of refrigeration systems, systems design, pressure/temperature relationships, electricity fundamentals, and controls.

If you are interested in attending this class, please contact Kate at the Training Center today!

kmino@metrojatc.org OR 651.779.6264

TESTING, ADJUSTING, AND BALANCING AIR SYSTEMS (BASIC)

2011-09-07T16:12:00.000-05:00

TAB 1 (Basic) Class is scheduled to start on Monday, September 26. Here is the class description:

This 72-hour class is designed to introduce the basics of TAB work to an individual, with lots of hands on applications. You will learn how to set up and use flow hoods, manometers, and many other testing instruments used daily by TAB technicians. In addition, you will learn how to test and balance various types of mechanical equipment along with their related duct systems. This is an excellent class for people who want to learn how to do TAB work as well as those people currently doing it.

NOTE: TAB 1 Class will be followed by TAB 2 (Advanced), TAB 3 (Hydronic Systems) and TABP 1 (Tab Technician Test Prep).

Email or call today to reserve your place in this class:
kmino@metrojatc.org OR 651.779.6264

LEED PROFESSIONAL ACCREDITATION CLASS

2011-09-01T11:47:00.001-05:00

LEED (Leadership in Energy and Environmental Design), developed and administered by the U.S. Green Building Council, is the most widely recognized and respected third party certification program for "green" buildings. This 24-hour class is an introduction to some of the specifics of sustainability and building Green, the LEED rating system, and how to start the process to become a LEED Green Associate and on to the Accredited Professional status if desired.

The JATC Trustees recognize the importance of this certification to our industry. As an added incentive for our members to become LEED credentialed, when you take and pass the LEED exam, the JATC will not only reimburse you for the full cost of the exam ($200) and fee ($50), but has now added a $150 bonus!

Take advantage of this opportunity today by contacting the Training Center to get YOUR name on the list for the next LEED Class:

kmino@metrojatc.org OR 651.779.6264

OSHA 30 CERTIFICATION CLASS STARTING SOON!

2011-08-24T08:57:00.000-05:00

Our next OSHA 30 Certification Class will start the evening of September 7. If you do not yet have this certification, you should consider taking this class. Here is the description:

This is a 30-hour safety awareness class. You will receive the OSHA-30 certification card upon successful completion of the class. More and more job specifications are requiring that at least one person per crew on the job site carry this certification. Put yourself in a good situation and get this card!

Register for this class: kmino@metrojatc.org OR 651.779.6264

RIGGING AND SIGNAL PERSON CLASS STARTING SOON!

2011-07-13T15:39:00.000-05:00

We will soon be offering another Rigging and Signal Person Class. Here is the class description:

OSHA now requires that any person involved with the rigging and/or signaling of cranes be a Qualified Rigger or Qualified Signal Person. Class length will be four hours which includes an exam on each qualification. Passing the exams ensures that you have the qualifications required to be a Qualified Rigger or Qualified Signal Person.

Don't miss this class - contact Kate today to get your name on the list: kmino@metrojatc.org OR 651.779.6264.

LOAD CALCULATION & DUCT DESIGN CLASS

2011-06-28T09:44:00.000-05:00

We have scheduled a Load Calculation & Duct Design Class to start on Tuesday, July 12. This 16-hour class will focus on the proper method to calculate heat loss for a residential home using a Manual J workbook and spreadsheet. Information from the spreadsheet will be used to calculate the heat loss for each room and the entire house. Duct design will incorporate information from the heat loss spreadsheet to design a duct system to distribute the correct amount of air to each room to satisfy the load. This class qualifies for NATE Continuing Education Hours.

SIGN UP WITH KATE: KMINO@METROJATC.ORG or 651.779.6264

LEED PROFESSIONAL ACCREDITATION CLASS

2011-06-28T09:17:00.000-05:00

We have a LEED Professional Accreditation Class scheduled to start on Wednesday, July 13. This is your opportunity to begin the process of becoming a LEED Green Associate!

SIGN UP TODAY: kmino@metrojatc.org OR 651.779.6264

MSHA (Mine Safety & Health Administration) Refresher Class Starting Soon

2011-06-20T13:07:00.001-05:00

If you hold an MSHA Card, be aware that you are required to take eight hours of refresher training every year in order to maintain your certification. We will be offering an eight hour refresher class soon. Get your name on the list for this update class now!

kmino@metrojatc.org

651.779.6264

MSHA (Mine Safety & Health Administration) Class Starting Soon

2011-06-20T12:58:00.001-05:00

An MSHA Card is mandatory for a lot of the work coming available in the northern part of Local 10. This 24-hour class meets MSHA requirements for initial training of new personnel without previous mining experience. Curriculum includes: Rights of Miners, introduction to the work environment, transportation/ground control, communication systems, respiratory devices, hazard recognition, evacuation plans, and more. An OSHA 10 or OSHA 30 card is a prerequisite for this class.

Sign up today!

kmino@metrojatc.org OR 651.779.6264

OSHA CLASS

2011-06-16T09:22:00.001-05:00

More and more job specifications are requiring that at least one person per crew on the job site carry an OSHA certification. Put yourself in a good situation and get this card! The first two nights of this class can get you an OSHA-10 card, but finishing the last four nights will get you the OSHA-30 card. Sign up today - we need just a few more students in order to get this class scheduled!

kmino@metrojatc.org OR 651.779.6264

LEED PROFESSIONAL ACCREDITATION CLASS STARTING SOON

2011-06-07T11:45:00.000-05:00

We will be scheduling a LEED Class soon. Take advantage of this opportunity to start the process to become a LEED Green Associate!

To sign up, contact Kate: kmino@metrojatc.org OR 651.779.6264

LOAD CALCULATION & DUCT DESIGN CLASS - STARTS JULY 12!

2011-06-07T11:32:00.001-05:00

LOAD CALCULATION & DUCT DESIGN CLASS has been scheduled for July 12, 14, 19, & 21, 4:30 to 8:30 p.m. This 16-hour class will focus on the proper method to calculate heat loss for a residential home using a Manual J workbook and spreadsheet. Information from the spreadsheet will be used to calculate the heat loss for each room and the entire house. Duct design will incorporate information from the heat loss spreadsheet to design a duct system to distribute the correct amount of air to each room to satisfy the load. Note: This class qualifies for NATE Continuing Education Hours.

SIGN UP TODAY!

EMAIL OR CALL KATE: kmino@metrojatc.org OR 651.779.6264

POWER LIMITED TECHNICIAN UPGRADE CLASS

2011-05-02T10:44:00.000-05:00

Do you hold a Minnesota Power limited Technician license? If it expires in the next few months you need to sign up for our next continuing education class today so that you can keep your license current! We'll be holding a class soon so get your name on our class list now:

email: kmino@metrojatc.org

651.779.6264

NEXT RIGGING CLASS - MAY 11

2011-04-27T07:56:00.000-05:00

Our next Rigging Class is scheduled for Wednesday, May 11, from 4:30 to 8:30 PM. There are still openings in this class, so sign up today! It is just one four-hour class and you will receive a card upon completion.

kmino@metrojatc.org OR 651.779.6264

FORKLIFT OPERATOR CERTIFICATION

2011-04-11T10:28:00.000-05:00

A four-hour Forklift Operator Certification Class has been scheduled for Thursday, April 21 from 4:30 to 8:30 p.m. This class will contain some classroom training and some time operating the forklift. Upon successful completion of this class, you will receive a certification card that is good for three years.

SIGNING UP IS EASY!
Email: kmino@metrojatc.org OR call: 651.779.6264

SERVICING ENVIRONMENTAL SYSTEMS III

2011-03-29T10:52:00.001-05:00

SES III picks up where SES II leaves off. Class will be held on Wednesday evenings beginning in early April IF enough members sign up.

Call today! 651.779.6264 OR email: kmino@metrojatc.org.

REFRIGERATION CODE REVIEW

2011-03-29T10:43:00.003-05:00

Refrigeration Code Review Class will be held on Tuesday & Thursday evenings, April 19 & 21. This eight-hour class is designed to provide you with a more in depth knowledge of the refrigeration portion of the international Mechanical Code. This chapter in the code covers the design, installation, and construction of refrigeration systems that vaporize and liquefy a fluid during the refrigeration cycle.

SIGN UP TODAY!

kmino@metrojatc.org OR 651.779.6264

HYDRONIC HEATING SYSTEMS CODE REVIEW CLASS - coming soon!

2011-03-22T15:01:00.000-05:00

This 12-hour class is designed to provide you with a more in-depth knowledge of this portion of the International Mechanical Code. Some class time will be spent on areas of the code that pertain to in-floor radiant heating and geothermal heat pump systems. HYDRONIC HEATING SYSTEMS CODE REVIEW CLASS is scheduled for the evenings of April 11, 13, & 18.

SIGNING UP FOR CLASS IS EASY!

Email: kmino@metrojatc.org

Call: 651.779.6264

RIGGING AND SIGNAL PERSON CLASSES STARTING SOON!

2011-03-21T15:53:00.000-05:00

(For class description, please see previous Rigging and Signal Person Class post.)

Next Rigging and Signal Person Classes are scheduled for:

Wednesday, March 30 @ 4:30 p.m.

Saturday, April 9 @ 7:00 a.m.

SIGN UP TODAY: kmino@metrojatc.org OR 651.779.6264

TESTING, ADJUSTING, AND BALANCING AIR SYSTEMS (BASIC)

2011-03-10T07:47:00.000-06:00

There will be a BASIC TAB CLASS on Fridays & Saturdays beginning April 8 for four weeks.

This class is designed to introduce the basics of TAB work to an individual, with lots of hands on applications. You will learn how to set up and use flow hoods, manometers, and many other testing instruments used daily by TAB technicians. In addition, you will learn how to test and balance various types of mechanical equipment along with their related duct systems. This is an excellent class for people who want to learn how to do TAB work, as well as for those people currently doing it.

SIGN UP TODAY!

kmino@metrojatc.org OR 651.779.6264

REFRIGERATION CODE REVIEW CLASS

2011-03-04T11:05:00.000-06:00

We will soon have a date for the start of a Refrigeration Code Review Class. This is a 12-hour class that is designed to provide you with a more in depth knowledge of the refrigeration portion of the international Mechanical Code. This chapter in the code covers the design, installation, and construction of refrigeration systems that vaporize and liquefy a fluid during the refrigeration cycle.

SIGN UP TODAY!

kmino@metrojatc.org OR 651.779.6264

OSHA CLASS STARTING MARCH 15!

2011-03-03T13:57:00.000-06:00

More and more job specifications are requiring that at least one person per crew on the job site carry this certification. Put yourself in a good situation and get this card! The first two nights of this class can get you an OSHA-10 card, but finishing the last four nights will get you the OSHA-30 card. Class starts on March 15!

Sign up today: kmino@metrojatc.org OR 651.779.6264

RENOVATION, REPAIR, AND PAINTING (RRP) CLASS

2011-02-17T13:33:00.000-06:00

The EPA requires that firms performing Renovation, Repair, and Painting (RRP) on pre-1978 schools, homes and child care facilities use certified renovators who are trained to follow lead-safe work practices (working around lead-based paint). Take this eight-hour EPA-approved class to attain this certification.

This class will be scheduled when enough members have signed up. Get your name on the list today!

Contact Kate: kmino@metrojatc.org OR 651.779.6264

MORE RIGGING AND SIGNAL PERSON CLASSES ARE SCHEDULED SOON!

2011-02-04T10:02:00.007-06:00

(For class description, please see previous Rigging and Signal Person Class post.)

Next Rigging and Signal Person Classes are scheduled for:

Wednesday, March 16 @ 4:30 p.m.

Saturday, March 26 @ 7:00 a.m.

NEARLY 300 MEMBERS HAVE ALREADY BEEN CERTIFIED!

- DON'T BE LEFT OUT - SIGN UP TODAY! -

kmino@metrojatc.org OR 651.779.6264

AUTOCAD CLASS STARTING SOON!

2011-02-03T11:46:00.000-06:00

We have just scheduled an AutoCAD Class to run on Mondays and Wednesdays beginning February 21. Here is the class description:

AutoCAD is a Computer Aided Design program used to create drawings. This 48-hour class is designed to teach you the basics of creating and working with CAD drawings. You will learn how to draw on the computer and plot out the finished drawing on a plotter. This is an excellent preparatory class for someone interested in doing detailing and planning work. Good detailers are in demand!

If you are interested in taking this class please contact Kate:

kmino@metrojatc.org OR 651.779.6264

CLASS NOTICE DELIVERY CHANGE!

2011-01-26T12:50:00.003-06:00

We have changed the way we send Journeylevel Class information to you. In place of the Class Memo that you are used to receiving, you will now receive a postcard. Different presentation, but the same information. We have also started emailing this information, so if we have your email address you will get it the same day the postcards are mailed.

Using postcards instead of envelopes will cut our mailing costs by more than 1/2!

STAINLESS STEEL WELDING & FINISHING CLASS

2011-01-03T10:01:00.000-06:00

Stainless Steel Welding & Finishing Class has been scheduled for Saturdays, January 15 through February 26, 2011. This 56-hour class is designed to teach you some basic skills in TIG welding and grinding and finishing stainless steel to food grade (NSF) standards. Course content will include purge welding, warpage control, bend allowances, grinding and finishing, knowledge of tools and abrasives, common practices for fab and install, etc. Two or three stainless steel projects are fabricated in this class. Time will be made available within this class for individuals who wish to learn how to weld aluminum or other metals.

Sign up for this class:

kmino@metrojatc.org OR 651.779.6264

FORKLIFT OPERATOR CERTIFICATION CLASS

2011-01-03T09:30:00.000-06:00

This four-hour class will contain some classroom training and some time operating the forklift. Upon successful completion of this class, you will receive a certification that is good for three years.

FORKLIFT OPERATOR CERTIFICATION CLASS is scheduled from 4:30 until 8:30 p.m. on Wednesday, January 19, 2011. If you want to take this class, please contact Kate:

kmino@metrojatc.org OR 651.779.6264

RIGGING AND SIGNAL PERSON CLASS

2010-12-17T11:53:00.000-06:00

We will soon be offering for the first time a Rigging and Signal Person Class. Here is the class description:

Beginning February 9, 2010, MN OSHA is requiring that any person involved with the rigging and/or signaling of cranes be a Qualified Rigger or Qualified Signal Person. The Training Center will be offering training classes on these qualifications starting in early January. Class length will be four hours which includes an exam on each qualification. Passing the exams ensures that you have the qualifications required to be a Qualified Rigger or Qualified Signal Person. These classes will be offered evenings, days, and Saturdays so when you call in to register, please indicate your preference.

EMAIL OR CALL TODAY TO GET YOUR NAME ON THE LIST FOR THIS CLASS!

kmino@metrojatc.org OR 651.779.6264

TESTING, ADJUSTING, AND BALANCING AIR SYSTEMS (ADVANCED)

2010-12-15T14:10:00.002-06:00

TAB II Class will be starting on January 3. This 56-hour class is designed to teach advanced TAB balancing skills and procedures to technicians with some balancing experience. Prerequisites for this class are our TAB I Class or equivalent experience.

SIGN UP NOW!

kmino@metrojatc.org OR 651.779.6264

SERVICING ENVIRONMENTAL SYSTEMS II CLASS STARTING SOON

2010-12-15T14:04:00.000-06:00

SES II Class will be starting January 11, 2011. Here is the class description:

SES II picks up where SES I leaves off, going more in depth in all the fundamental areas of HVAC Service, such as gas heating, air conditioning, and air distribution. Plenty of time will be spent on wiring diagrams, troubleshooting, and hands on work in this 88-hour class. North American Technician excellence (N.A.T.E) and Industry Competency Exam (I.C.E.) certifications will be attainable at the conclusion of this class.

Sign up today by contacting Kate:

kmino@metrojatc.org OR 651.779.6264

LOAD CALCULATIONS & DUCT DESIGN CLASS

2010-12-15T11:56:00.000-06:00

Load Calculations & Duct Design is a 16-hour class focusing on the proper method to calculate heat loss for a residential home using a Manual J workbook and spreadsheet. Information from the spreadsheet will be used to calculate the heat loss for each room and the entire house. Duct design will incorporate information from the heat loss spreadsheet to design a duct system to distribute the correct amount of air to each room to satisfy the load.

NOTE: This class qualifies for NATE continuing education hours.

TO SIGN UP FOR THIS CLASS OR ANY OTHER CLASS, CONTACT KATE:

kmino@metrojatc.org OR 651.779.6264

INTRODUCTION TO AUTOCAD CLASS

2010-12-14T12:00:00.000-06:00

We have an Introduction to AutoCAD Class scheduled to start on January 6. However, we need a few more members to sign up to ensure that we have enough students to hold the class as scheduled. Here is the class description:

AutoCAD is a Computer Aided Design program used to create drawings. This 48-hour class is designed to teach you the basics of creating and working with CAD drawings. You will learn how to draw on the computer and plot out the finished drawing on a plotter. This is an excellent preparatory class for someone interested in doing detailing and planning work. Good detailers are in demand!

Make good use of these cold winter evenings and sign up for this class today!

kmino@metrojatc.org OR 651.779.6264

MSHA (Mine Safety & Health Administration) Class STARTS 12/14

2010-11-29T10:10:00.000-06:00

Sign up today!

kmino@metrojatc.org OR 651.779.6264

OSHA CLASS - Starts November 29!

2010-11-22T10:48:00.000-06:00

There will be an OSHA 10 and OSHA 30 Class beginning Monday, November 29, from 4:00 to 9:00 p.m.

To obtain your OSHA 10 Certification Card, you need only attend the first two classes (November 29 & 30).
To obtain your OSHA 30 Certification Card, you need to attend all six classes (November 29, 30, December 8, 9, 15, & 16).

If you do not have an OSHA Card yet, sign up for this class today! If you have an OSHA 10 Card, consider signing up to get your OSHA 30 Card!

kmino@metrojatc.org OR 651.779.6264

GREEN CONSTRUCTION AWARENESS - LEED ASSOCIATE CLASSES

2010-11-11T15:15:00.000-06:00

Two classes are starting soon. Come for the first two evenings (Green Construction Awareness) or continue on for the next four classes and learn what it takes to get your LEED Green Associate credential.

LEED (Leadership in Energy and Environmental Design) is administered by the U.S. Green Building Council and is the most widely recognized and respected third-party certification program for Green building. This class is an introduction to some of the specifics of sustainability and building Green, the LEED rating system, and how to start the process to become a LEED Green Associate and more.

Sign up today!

email kmino@metrojatc.org OR call 651.779.6264

DUCT SIZING CALCULATOR USE

2010-10-28T08:42:00.000-05:00

This eight-hour class will be scheduled just as soon as a few more members sign up. Here is the class description:

This class will focus on the use of the SMWIA/Trane Ductulator, the industry standard in circular slide rule airflow calculations. The Ductulator aids in laying out air handling duct systems and determining proper duct sizes. We will be using the ITI version of the Ductulator and some class time will be spent on aspect ratio, friction loss, duct sizing, and some of the formulas and other useful design information printed on the back side of the Ductulator.

SIGN UP TODAY: kmino@metrojatc.org OR 651.779.6264

FUNDAMENTAL OF CONTROLS & DIRECT DIGITAL CONTROLS

2010-10-28T08:13:00.000-05:00

This class is a basic overview of controls, including Direct Digital Controls (DDC), designed for Service, TAB, and Power Limited Technician oriented individuals. Course content will include mechanical equipment, components & variables, terminology, control types, sequences of operation, specifications, sensors, valves & dampers, and safety.

This class will be scheduled just as soon as a few more members sign up.

SIGN UP TODAY: kmino@metrojatc.org OR 621.779.6264

COMPUTERS, BASICS AND USE OF THE INTERNET

2010-10-27T15:25:00.000-05:00

This class is open to all members AND significant others! We need just a few more people to sign up in order to schedule the class. Here is the class description:

This 24-hour class is designed to introduce you to basic computer use beginning with turning on the power to surfing the Internet. This class is ideal for members who haven't yet gotten around to learning how to use a computer. We will help take away some of the mystery regarding emailing, spreadsheets, typing Word documents, etc. This can become a great new tool or hobby, especially for retirees with lots of leisure time and loved ones to correspond with.

SIGN UP TODAY! Call Kate at 651.779.6264 OR email kmino@metrojatc.org

ARCHITECTURAL SHEET METAL

2010-10-27T15:09:00.000-05:00

Do you want to learn some of the basics of fabricating and installing Architectural Sheet Metal? The primary focus of this 32-hour class will be on installation skills with plenty of hands on applications. Successful completion will certainly help make you more employable with roofing and architectural firms. We will schedule this class as soon as we get just a few more members to sign up. You can do so right now: kmino@metrojatc.org OR 651.779.6264

FORKLIFT OPERATOR CERTIFICATION

2010-10-27T14:15:00.000-05:00

This four-hour class will be held soon! It will include some classroom training and some time operating the forklift. Upon successful completion of this class, you will receive a certification that is good for three years.

SIGN UP NOW: kmino@metrojatc.org OR 651.779.6264

HYDRONIC HEATING SYSTEMS CODE REVIEW CLASS

2010-10-26T15:03:00.000-05:00

This class will likely be scheduled for early December. Get your name on this class list today:

kmino@metrojatc.org OR 651.779.6264

PROJECT MANAGEMENT CLASS

2010-10-26T14:53:00.000-05:00

This class is starting soon - November 10 - so sign up now! Here is the description of this 24-hour class:

Project Management Class is designed to be an introduction to developing basic project management skills. Becoming a successful project manager takes plenty of on the job experience. Course content includes management and communications, construction documents, controlling costs, scheduling, productivity, legal considerations, budget estimating, project completion, etc.

SIGN UP TODAY!

kmino@metrojatc.org OR 651.779.6264

GAS BURNER CODE REVIEW CLASS

2010-10-26T11:35:00.000-05:00

This basic 16-hour course will help you to better understand the gas safety controls of a residential furnace and their operation. It will also cover proper gas piping procedures, pipe sizing, clocking, meter and gas troubleshooting, and combustion analysis (Orsat tests).

Class starts soon - November 10 - so sign up today!

email: kmino@metrojatc.org OR call: 651.779.6264.

POWER LIMITED TECHNICIAN UPGRADE CLASS

2010-10-26T11:19:00.001-05:00

Don't let your license lapse! This 16-hour class will meet the continuing education requirement to maintain your Minnesota Power Limited Technician License. Class starts on November 23. Plan ahead and reserve your place in this class today!

kmino@metrojatc.org OR 651.779.6264

FIRE LIFE SAFETY LEVEL ONE

2010-10-26T11:03:00.000-05:00

A 16-hour FIRE LIFE SAFETY LEVEL ONE CLASS is scheduled to start on November 15. Successfully completing this class and the included exam will certify you as a National Energy Management Institute (NEMI) Life Safety Systems Level One Technician. Here is the class description:

Building Codes require the design of an integrated system of building features to protect occupants from fire and smoke. This class will ensure that you have the core knowledge necessary to competently install, inspect, and maintain the fire, smoke, ceiling and combination fire/smoke dampers in the HVAC portion of these systems.

Sign up today!

kmino@metrojatc.org OR 651.779.6264

PROJECT MANAGEMENT CLASS

2010-10-04T09:00:00.001-05:00

We need a few more members to sign up for the PROJECT MANAGEMENT CLASS so that we have enough students to get it scheduled.

This 24-hour class is designed to be an introduction to developing basic project management skills. Becoming a successful project manager takes plenty of on the job experience. Course content includes management and communications, construction documents, controlling costs, scheduling, productivity, legal considerations, budget extimating, project completion, etc.

SIGN UP TODAY SO THIS CLASS CAN START SOON!

kmino@metrojatc.org OR 651.779.6264

POWER LIMITED TECHNICIAN UPGRADE CLASS

2010-09-28T16:51:00.001-05:00

If you hold the Minnesota Power Limited Technician License, you are required to earn 16 hours of continued education for renewal of your license. Don't let your license lapse, it costs more to renew if you do! This 16-hour class will give you the needed hours of upgrade training to maintain your license.

Check your license expiration date today and see if you need to get signed up for this class! We need just a few more names on our list before we can get this class scheduled.

To sign up, email Kate: kmino@metrojatc.org OR call: 651.779.6264

LAGGING CLASS STARTING SOON!

2010-09-27T09:13:00.000-05:00

There is a 40-hour LAGGING CLASS on Thursdays beginning October 7, 4:30 to 8:30 p.m.

Lagging is the process of covering and protecting insulation with sheet metal, plastic, and other materials. This class will provide you with some much needed basic skills in this aspect of our trade. There is a tremendous amount of power plant, refinery, and other industrial type work that is in the works within Local 10 and also nationwide. These types of projects typically require a lot of lagging fabrication and installation.
SIGN UP TODAY!!
Email: kmino@metrojatc.org OR Call: 651.779.6264

Are you taking the Masters Refrigeration Test soon?

2010-09-21T14:14:00.000-05:00

If you are taking the Masters Refrigeration Test soon and could use some help studying for it, come to the Training Center on Tuesday, September 28 at 4:30 for pizza, practice questions, and study time with others in the same 'boat'! Instructor Dave Fairbanks will be moderating this two-hour study session in the Student Break Room.

Questions? kmino@metrojatc.org OR 651.779.6264

ENERGY STAR PROGRAM

2010-09-14T08:11:00.002-05:00

We need a few more members to sign up for this eight-hour Energy Star Program Class scheduled for the evenings of September 30th & October 7th. Here is the class description:

Green starts with energy! Energy Star is a joint program of the US Environmental Protection Agency (EPA) and the Dept of Energy. This program delivers the technical information and tools that organizations need to choose energy efficient solutions and managements practices. Most of the time in this class will be spent on the www.energystar.gov website becoming familiar with and navigating the various areas of this busy site, as well as using some of the interactive energy loss/savings calculators on it.

Contact Kate: kmino@metrojatc.org OR 651.779.6264

SERVICING ENVIRONMENTAL SYSTEMS 1 CLASS

2010-09-10T12:53:00.002-05:00

Servicing Environmental Systems 1 Class is starting soon (September 28) and still has a few openings!

SES 1 will focus on the core knowledge required for servicing HVAC systems. We'll cover the basics of refrigeration systems, systems design, pressure/temperature relationships, electricity fundamentals, and controls. This 88-hour class meets on Tuesday and Thursday evenings.

If you are interested in attending this class, please contact Kate at the Training Center today!

kmino@metrojatc.org OR 651.779.6264

SERVICING RESIDENTIAL FURNACE SYSTEMS CLASS

2010-09-10T11:38:00.002-05:00

We need a few more members to sign up for Servicing Residential Furnace Systems Class. It is scheduled 9/27/10 - 10/27/10 (Mondays & Wednesdays) from 4:30 to 8:30 p.m. Here is the class description:

This 40-hour class is designed to give you some basic diagnostic and repair skills. We'll be covering service calls & safety procedures, wiring diagrams, furnace system diagnosing and troubleshooting electric & gas.

Please contact Kate right away if you are interested:

kmino@metrojatc.org OR 651.779.6264

TESTING, ADJUSTING, and BALANCING AIR SYSTEMS (BASIC)

2010-09-09T10:58:00.003-05:00

TAB 1 (Basic) Class is scheduled to start on Monday, September 20 and there are still a few openings! Here is the class description:

This 72-hour class is designed to introduce the basics of TAB work to an individual, with lots of hands on applications. You will learn how to set up and use flow hoods, manometers, and many other testing instruments used daily by TAB technicians. In addition, you will learn how to test and balance various types of mechanical equipment along with their related duct systems. This is an excellent class for people who want to learn how to do TAB work as well as those people currently doing it.

NOTE: TAB 1 Class will be followed by TAB 2 (Advanced), TAB 3 (Hydronic Systems) and TABP 1 (Tab Technician Test Prep).

Email or call today to reserve your place in this class:
kmino@metrojatc.org OR 651.779.6264

New Journey-Level Class Brochure

2010-07-30T10:06:00.003-05:00

Look for our new Journey-Level Class Brochure to be ready around Labor Day. Members with a metro area address will receive one in your mailbox. As always, one will be posted on WWW.SMW10.org. If you are outside the metro area, you may stop by and pick one up or give us a call (651.779.6264) to have one mailed to you.

POWER LIMITED TECHNICIAN UPGRADE CLASS

2010-06-23T10:49:00.002-05:00

Power Limited Technician Upgrade Class will be starting on July 13. If you hold the Minnesota Power Limited Technician License, you are required to earn 16-hours of continued education for renewal of the license. Don't let your license lapse, it costs more money to renew if you do! This 16-hour class will give you the needed hours of upgrade training to maintain your license.
There are still openings in this class, so check your license now to see if you should be signing up!

To sign up for this class, please contact Kate:
kmino@metrojatc.org OR 651.779.6264

REFRIGERATION CODE REVIEW CLASS

2010-06-23T10:24:00.002-05:00

Refrigeration Code Review Class has been scheduled and there are still a few openings! Class dates are July 6, 8, & 13. Here is the class description:

This 12-hour class is designed to provide you with more in depth knowledge of the refrigeration portion of the International Mechanical Code. This chapter in the code covers the design, installation and construction of refrigeration systems that vaporize and liquefy a fluid during the refrigeration cycle.

GREEN CONSTRUCTION AWARENESS - LEED GREEN ASSOCIATE CLASS

2010-06-09T08:13:00.005-05:00

This class has really gotten the attention of our members, with more than 120 currently signed up! This is our BIGGEST CLASS EVER! Have YOU signed up yet?

We have one class in progress and will be scheduling more soon. This is an eight-hour class that will extend to 24-hours for some students. The first eight hours of the class are devoted to educating you on Sustainability, LEED (Leadership in Energy & Environmental Design), Green Construction Practices and Projects, and the dos and don'ts associated with them. You can be a big asset on these projects as opposed to an uninformed liability. Those wishing to pursue the LEED Green Associate credential will then go on to the remaining sessions for further training. Please know in advance that pursuing and attaining the LEED GA credential requires a substantial amount of self-study time, which this class will help prepare you for, as well as some $. The exam for the LEED GA credential is administered by the Green Building Certification Institute. Completion of our class does NOT get you the LEED GA credential, but it WILL do a very good job preparing you to take the exam that will get you the credential.

DON'T BE LEFT OUT! ADD YOUR NAME TO THIS CLASS LIST AND GET EDUCATED ABOUT GREEN CONSTRUCTION AWARENESS - LEED GREEN ASSOCIATE.

CONTACT KATE TODAY:
kmino@metrojatc.org OR 651.779.6264

Duct Construction Standards / HVAC-SMACNA Class

2010-05-17T12:00:00.003-05:00

Duct Construction Standards / HVAC-SMACNA Class will be held on Monday evenings, June 21, 28, & July 6. Here is the class description:

This 12-hour class will focus on the use of the SMACNA HVAC Duct Construction Standards Manual. Specifically, students will review sample plans and specifications, learn how to determine pressure classifications for duct systems, and reference the rectangular duct construction schedules to determine adequate gauges, transverse joints, and intermediate reinforcement requirements. Becoming comfortable with the use of these schedules is the primary intent of this class.

Call today to sign up for this class!

kmino@metrojatc.org OR 651.779.6264

Lagging Class

2010-05-17T11:40:00.003-05:00

We need just a few more members to sign up so that we can get a Lagging Class scheduled. Here is the class description:

Lagging is the process of covering and protecting insulation with sheet metal, plastic, and other materials. This 40-hour class will provide you with some much needed basic skills in this aspect of our trade. There is a tremendous amount of power plant, refinery, and other industrial type work that is in the works within Local 10 and also nationwide. These types of projects typically require a lot of lagging fabrication and installation.

Fire/Smoke Damper Installation

2010-05-13T09:00:00.003-05:00

We need just a few more members to sign up so that we can schedule Fire/Smoke Damper Installation Class. This class is just 8-hours, so sign up today! Here's the description:

This class will teach you the proper use and correct installation practices for fire, smoke, and radiation dampers. Improper selection, installation, and modifications can void warranties and fail inspections. You will also be given information on new products and time saving methods.

To sign-up for this class and any other classes, contact Kate:
kmino@metrojatc.org OR 651.779.6264

Green Construction Awareness - LEED Green Associate Class

2010-05-12T14:24:00.003-05:00

We are offering a Green/LEED Class on Mondays, June 7 & 14 from 5:00 to 9:00 PM. This eight-hour class will extend to 24-hours for some students.
The first eight hours of the class are devoted to educating you on sustainability, LEED, green construction practices and projects, and the dos and dont's associated with them. Those wishing to pursue the LEED Green Associate credential will then go on to the remaining sessions for further training.
Please know in advance that pursuing and attaining the LEED GA credential requires a substantial amount of self-study time, which this class will help prepare you for, as well as some $. The exam for the LEED GA credential is administered by the Green Building Certification Institute. Completion of this class does NOT get you the LEED GA credential, but it WILL do a very good job preparing you to take the exam that will get you the credential.
Dates for the remaining class sessions will be determined on the second night of class by those students choosing to continue.

To enroll in this class, please contact Kate: kmino@metrojatc.org OR 651.779.6264

Refrigerant Handling - Hands On Class Scheduled!

2010-05-05T10:38:00.004-05:00

Refrigerant Handling - Hands On Class has been scheduled for Mondays and Tuesdays, June 14 through June 22 from 4:30 to 8:30 p.m. Here is the description:

In this 16-hour class you will install, charge, reclaim, and recover refrigerant in a split system. Component identification and review of the refrigerant cycle is also covered. You must have the CFC card in order to take this class. This class qualifies for NATE Continuing Education Hours.

Contact Kate to get your name on the list for this class:
kmino@metrojatc.org OR 651.779.6264

Refrigerant Handling - CFC Certification Class Scheduled!

2010-05-05T10:02:00.002-05:00

There will be a Refrigerant Handling - CFC Certification Class on Wednesdays from 4:30 to 8:30 p.m. beginning May 26 through June 9. This is a 12-hour class with the test for certification on the last night. If you pass the test, you will hold the card that is the Environmental Protection Agency's certification to purchase and handle refrigerants as outlined in Section 608 of the Clean Air Act.

Contact Kate now to register for this class!
~
kmino@metrojatc.org OR 651.779.6264

Gas Burner Code Review Class starting May 17

2010-05-03T13:27:00.002-05:00

There is a 16-hour Gas Burner Code Review Class scheduled from 4:30 to 8:30 p.m. on the following dates:

Monday, May 17
Monday, May 24
Monday, June 7
Tuesday, June 8

This is a basic course that will help you to better understand the gas safety controls of a residential furnace and their operation. This class will also cover proper gas piping procedures, pipe sizing, clocking, meter and gas troubleshooting, and combustion analysis (Orsat tests).

Class will be filled on a first come, first served basis, so call soon to reserve your place:

kmino@metrojatc.org OR 651.779.6264

OSHA CLASS - starts May 10!

2010-04-30T10:24:00.003-05:00

There will be an OSHA 10 and OSHA 30 Class starting Monday, May 10. Classes will be held on Mondays and Wednesdays from 4:00 pm until 9:00 pm in Room 124 at the Training Center.

To obtain your OSHA 10 Certification Card, you need only attend the first two classes (May 10 & 12).
To obtain your OSHA 30 Certification Card, you need to attend all six classes (May 10, 12, 17, 19, 24, & 26).

If you do not have an OSHA Card yet, sign up for this class today! If you have an OSHA 10 Card, consider signing up to get your OSHA 30 Card!

kmino@metrojatc.org OR 651.779.6264

REFRIGERANT HANDLING - CFC CERTIFICATION CLASS Coming Soon!

2010-04-21T08:38:00.004-05:00

We are very close to having enough people to hold a Refrigerant Handling CFC Certification Class followed by a Refrigerant Handling - Hands On Class. We need just a few more members to sign up! This is a 12-hour class with the test for certification on the last night. If you pass the test, you will hold the card that is the Environmental Protection Agency's certification to purchase and handle refrigerants as outlined in Section 608 of the Clean Air Act.

WELDING CLASS DAY CHANGE!

2010-04-20T07:58:00.004-05:00

There will be NO Welding Class on Monday evening, April 26. Welding Class will resume the following week on TUESDAY, May4. This class will continue on TUESDAYS ONLY (no more Mondays!) as long as there is a need.

If you have any questions, please contact Kate: kmino@metrojatc.org OR 651.779.6264

OSHA 10 and OSHA 30 Class

2010-04-15T10:45:00.002-05:00

We need just a few more people to start another OSHA CLASS! Enroll in this class if you want to get an OSHA 10 card (10-hours of classroom training) or an OSHA 30 card (30-hours of classroom training). If you don't have one yet, consider getting it now! SIGN UP TODAY!

kmino@metrojatc.org OR 651.779.6264

Gas Piping (Flexible) Installation Class starting soon!

2010-04-14T09:26:00.003-05:00

Gas Piping (Flexible) Installation Class will be held from 4:30 to 8:30 p.m. on the following Mondays: April 26, May 10, & May 24. This 12-hour class will include the Gastite, TracPipe, and Wardflex training programs as put on by the manufacturer's representatives. These three brands of corrugated stainless steel tubing (CSST) are the most prevalent in use in this part of the country for flexible fuel gas piping systems. This class will include hands-on installation of tubing with black pipe fittings on a furnace and a pressure test.

If you are interested in this class, please contact Kate:
kmino@metrojatc.org OR 651.779.6264

OSHA CLASS - Coming Soon!

2010-04-07T10:34:00.002-05:00

We will be setting up another OSHA CLASS soon! Enroll in this class if you want to get an OSHA 10 card (10-hours of classroom training) or an OSHA 30 card (30-hours of classroom training). If you don't have one yet, consider getting it now! SIGN UP TODAY!

kmino@metrojatc.org OR 651.779.6264

Servicing Environmental Systems III Class starting soon!

2010-04-07T08:10:00.004-05:00

A hands on class, Servicing Environmental Systems III, will be held on Wednesdays, April 21 through June 23, from 4:30 to 8:30 p.m. This 40-hour class requires that you have completed SES I and SES II or have the prior approval of the Instructor.
This class is new and is not listed in the Journeylevel Class Brochure. It will be a hands-on continuation of SES I and SES II.

If you are interested in this class, please contact me today:
kmino@metrojatc.org OR 651.779.6264

Estimating (HVAC) / Design/Build HVAC Systems Class Starting Soon!

2010-04-07T07:15:00.006-05:00

An Estimating (HVAC) / Design/Build HVAC Systems Class will be held Mondays, April 19 through June 14, from 4:30 to 8:30 p.m. This 32-hour class will provide the core knowledge necessary to competently design some basic HVAC systems for various types of building construction and occupancies. It will also include instruction on preparing estimates, job "takeoff" accuracy, estimating labor and material costs, productivity variables, labor factor for different building types, overhead and markup, etc.

If you are interested in taking this class, please contact me ASAP as this class will likely fill up!

kmino@metrojatc.org OR 651.779.6264

Servicing Environmental Systems II Class has openings!

2010-03-30T10:08:00.005-05:00

WE HAVE JUST STARTED AN SES II CLASS AND THERE ARE STILL OPENINGS! Class meets Friday and Saturday mornings in April, then switches to a full day on Fridays only through June 11.

SES II picks up where SES I leaves off, going more in depth in all the fundamental areas of HVAC service, such as gas heating, a/c, and air distribution. Plenty of time will be spent on wiring diagrams, troubleshooting, and hands on work. NATE and ICE certifications will be attainable at the conclusion of this class.

Please contact me right away if you are interested in joining this class: kmino@metrojatc.org OR 651.779.6264.

Mechanical Code Class starting April 7

2010-03-25T13:46:00.003-05:00

There are still openings in a daytime Mechanical Code Class that will run on the following four Wednesdays: April 7, April 21, May 5, and May 19, 2010. This class starts at 7:00 a.m and runs until 3:00 p.m. Here is the class description:

This class is based on the new International Mechanical Code adopted by the state of Minnesota and will help prepare you for the Twin Cities Warm Air & Ventilation Competency exam. It is also very helpful for foremen and superintendents as well as detailers and estimators.

If you would like to be in this class, or if you have any questions about it, please contact me at: kmino@metrojatc.org OR 651.779.6264.

TAB Technician Test Prep Class starting soon!

2010-03-23T15:09:00.003-05:00

TAB Technician Test Prep Class is scheduled to start on April 5 from 5:00 until 9:00 p.m. There is still room in this class! Prerequisites are completion of the TAB-1 Class or equivalent field experience in testing and balancing. Here is the class description:

This 16-hour class is designed to prepare people to take the ITI Certified TAB Technician written exams for air and hydronics. The exams will be scheduled for a date after the conclusion of this class. Class dates are: April 5, 7, 12, & 14.

Please contact me soon if you are interested in taking this class: kmino@metrojatc.org OR 651.779.6264.

TAB - BASIC - we have a few openings in upcoming class...

2010-03-22T15:00:00.003-05:00

Testing, Adjusting and Balancing Air Systems (Basic) Class is going to be scheduled soon and will be held on Fridays and Saturdays for 4-weeks during the day. Here is the description of this class:

This class is designed to introduce the basics of TAB work with lots of hands-on applications. You will learn how to set up and use flow hoods, manometers, and many other testing instruments used daily by TAB technicians. You will also learn how to test and balance various types of mechanical equipment along with their related duct systems. This is an excellent class for people who want to learn how to do TAB work as well as for those people currently doing it.

If you would like to be a part of this class, please contact me ASAP: kmino@metrojatc.org OR 651.779.6264.

Gas Burner Code Review Class needs a few more people...

2010-03-22T14:47:00.006-05:00

We have a Gas Burner Code Review Class coming up that is almost full enough to schedule. We just need a few more people to sign up! It is a 16-hour evening class. Here is the class description:

This is a basic course that will help you to better understand the gas safety controls of a residential furnace and their operation. This class will also cover proper gas piping procedures, pipe sizing, clocking, meter and gas troubleshooting, and combustion analysis (Orsat tests).

Please contact me ASAP if you are interested in taking this class: kmino@metrojatc.org OR 651.779.6264.

LAGGING CLASS needs a few more people

2010-03-19T14:15:00.004-05:00

We are just a few people short of starting a new LAGGING CLASS. This is a 40-hour evening class. Here is the description:

Lagging is the process of covering and protecting insulation with sheet metal, plastic, and other materials. This class will provide you with some much needed basic skills in this aspect of our trade. There is a tremendous amount of power plant, refinery, and other industrial type work that is in the works within Local 10 and also nationwide. These types of projects typically require a lot of lagging fabrication and installation.

Please contact me if you are interested: kmino@metrojatc.org OR 651.779.6264

GEOTHERMAL CLASS - starts Monday, March 22

2010-03-19T13:38:00.001-05:00

GEOTHERMAL, FUNDAMENTALS & OPERATIONS Class starts on Monday, March 22. There are still a few openings! If you would like to be in this class, please contact Kate right away: kmino@metrojatc.org OR 651.779.6264.